Guangzhou Rack Design Commercial Equipment Co., Ltd.
Leave Your Message

Custom Beam Pallet Racking for Industrial Warehouses and 3PL Storage

Custom beam pallet racking is an engineered storage system designed around your warehouse dimensions, pallet sizes, load requirements and forklift operation. It combines adjustable beams, heavy-duty steel frames and project-specific accessories to improve storage capacity, accessibility and long-term flexibility.

    Custom beam pallet racking for industrial warehouses, factories, logistics centers and 3PL facilities. Configure rack height, beam span, pallet capacity and accessories with layout design support.

    Custom Beam Pallet Racking Built for Your Storage Requirements

    Every warehouse has different pallet sizes, clear heights, aisle constraints and handling equipment. Our custom beam pallet racking is engineered around your actual storage conditions rather than limited to a fixed catalog configuration.

    The system combines steel upright frames, horizontal load beams and project-specific accessories to create a stable and adjustable storage structure. It can be configured for general warehouses, manufacturing plants, logistics centers, cold rooms, wholesale operations and high-volume distribution facilities.

    Looking for a complete storage solution? Share your warehouse drawing, pallet details and required quantity. We can provide a rack layout, configuration proposal and quotation for review.

    Custom Beam Pallet Racking

    Main Advantages

    Project-based customization for height, depth, bay width and storage levels

    Adjustable beam arrangement for different pallet and product heights

    Direct pallet access in selective configurations

    Heavy-load options for industrial materials and finished goods

    Modular expansion when pallet positions or warehouse zones increase

    Multiple surface treatments for standard indoor, humid or low-temperature conditions

    Compatible with common forklifts when the aisle and beam layout are correctly designed

    Optional engineering documents including layout drawings, component lists and installation guidance

    image.png

    Product Structure

    Upright Frames:Upright frames carry the vertical load of the rack. Their height, depth, profile and bracing arrangement are selected according to the storage load, rack geometry, building height and local project requirements.

    Load Beams:Horizontal beams support the pallets and connect the upright frames. Beam profile, length and capacity are selected according to pallet weight, span, number of levels and required safety clearance.

    Decking and Pallet Supports:Wire mesh decking, steel panels or pallet support bars can be added where loose cartons, non-standard pallets or additional load distribution is required.

    Protection and Safety Accessories:Column guards, end-of-aisle barriers, backstops, row spacers, wall ties and load capacity signs can be configured according to the warehouse layout and operating conditions.

    XIJIE.pngXIJIE 1.png

    Typical Specification Options

    Parameter

    Customizable Option

    Rack type

    Selective beam pallet racking or project-specific configuration

    Upright height

    Designed according to clear warehouse height

    Frame depth

    Selected according to pallet depth and operating clearance

    Bay width

    Selected according to pallet quantity, beam span and forklift access

    Beam levels

    Configured according to pallet height and required storage positions

    Load capacity

    Engineered according to pallet weight and beam span

    Steel material

    Project-specific steel grade and section selection

    Finish

    Powder coating, galvanized or other approved treatment

    Connection

    Bolted beam-to-frame connection; project-specific structure

    Anchoring

    Floor anchors and base plates according to floor condition

    Accessories

    Decking, pallet supports, guards, back mesh, spacers and signage

    Documentation

    Layout drawing, component list, assembly guidance and load information

    The table describes configuration options, not a universal load rating. The final design must be confirmed by engineering based on the real pallet load, rack dimensions, floor condition, forklift impact and applicable local requirements.

    image.png

    Suitable Industries and Storage Conditions

    Industrial Manufacturing:Store raw materials, components, work-in-progress goods and finished products in clearly defined rack zones. Heavy-duty beam options and aisle guards can be added for frequent forklift traffic.

    Logistics and 3PL Warehouses:Custom bay widths and standardized components help operators manage different customer inventories while retaining the flexibility to expand or rearrange storage rows.

    Food and Beverage Distribution:The layout can be planned around pallet turnover, SKU grouping and hygiene requirements. Corrosion-resistant finishes can be considered for humid or temperature-controlled areas.

    E-Commerce and Retail Distribution:The lower rack levels can be configured for manual picking while upper levels provide reserve pallet storage. The design can be coordinated with picking aisles, packing areas and replenishment routes.

    Machinery, Steel and Building Material Storage:For heavy or irregular loads, the frame and beam structure can be reinforced according to product weight, pallet condition, forklift type and storage frequency.

    image.png

    Common Layout Configurations

    Standard Selective Beam Racking

    This is the most flexible configuration for warehouses with many SKUs and frequent access requirements. Each pallet position is accessible from the aisle.

    Back-to-Back Rack Rows

    Two rows can share a common back-to-back arrangement to improve floor utilization while preserving organized forklift aisles.

    Double-Deep Storage

    Double-deep layouts increase storage density by placing pallets deeper into the rack. They require suitable forklift equipment and careful management of pallet sequence and accessibility.

    High-Bay Storage

    Where the building has sufficient clear height and the handling equipment can reach upper levels, the rack can be designed as a high-bay solution. Seismic, floor and forklift conditions must be evaluated before finalization.

    Rack-Supported Mezzanine Integration

    For projects that need pallet storage below and manual picking or office space above, beam racking can be coordinated with a mezzanine platform and access system.

    Engineering and Manufacturing Process

    1. Requirement Review:We review your warehouse dimensions, pallet data, load requirements, handling equipment and operating environment.

    2. Layout Concept:A preliminary layout identifies rack rows, aisles, pallet positions, loading areas and traffic routes.

    3. Structural Configuration:Beam spans, upright sections, storage levels, anchoring and accessories are selected according to the project requirements.

    4. Production and Quality Control:Components are manufactured, finished and checked before packing. Project-specific labeling and component lists can be prepared for installation.

    5. Export Packing and Delivery:Knock-down packing and protective packaging help improve container utilization and reduce the risk of damage during shipment.

    6. Installation Support:Assembly drawings, installation instructions and remote technical support can be provided. On-site installation support can be discussed for larger projects.

    image.png

    What Makes a Good Custom Rack Proposal?

    A useful quotation should not only list steel components and prices. It should also make clear:

    How many pallet positions are provided;

    What pallet size and load are assumed;

    What aisle width is required;

    Which forklift is assumed;

    What accessories are included;

    How the rack is anchored and protected;

    Which coating is recommended for the environment;

    What drawings and installation documents are supplied;

    What lead time and packing method apply.

    We recommend comparing proposals on total usable pallet positions, safety configuration, engineering scope and delivery completeness—not price alone.

    Frequently Asked Questions

    Can the rack be made to match our existing warehouse?

    Yes. We can review warehouse drawings, CAD files, measurements or site photos and develop a layout around the available space.

    Can you supply different beam capacities in one project?

    Yes, if the layout and load labels clearly identify the different configurations. Beam capacity should be confirmed separately for each span and loading condition.

    Can the beam height be adjusted after installation?

    In many configurations, beams can be repositioned within the approved system design. Any new loading condition or major layout change should be reviewed before use.

    Is custom beam racking suitable for cold storage?

    It can be suitable when the coating, steel protection, anchors, decking and operating conditions are selected for the cold-room environment.

    Do you provide a warehouse layout before ordering?

    A preliminary layout can be prepared after receiving the necessary warehouse and pallet information. The final design scope depends on project complexity and required documentation.

    Request a Custom Rack Layout

    Send us your warehouse dimensions, pallet specifications, required quantity and forklift information. Our team will recommend a suitable beam pallet racking configuration with a project-based quotation.

    image.png

    Get a custom warehouse storage rack proposal designed around your operation.

    Leave Your Message